# changelog

author: systemd maintenance team <systemd-maint@redhat.com> - 239-58
changelog:
  - ci: drop CentOS 8 CI (#2017033)
  - test: adapt to the new capsh format (#2017033)
  - test: ignore IAB capabilities in `test-execute` (#2017033)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-59
changelog:
  - core: disallow using '-.service' as a service name (#2051520)
  - shared/dropin: support -.service.d/ top level drop-in for service units (#2051520)
  - core: change top-level drop-in from -.service.d to service.d (#2051520)
  - shared/dropin: fix assert for invalid drop-in (#2051520)
  - udev: fix slot based network names on s390 (#1939914)
  - udev: it is not necessary that the path is readable (#1939914)
  - udev: allow onboard index up to 65535 (#1939914)
  - Revert "basic: use comma as separator in cpuset cgroup cpu ranges" (#1858220)
  - acpi-fpdt: mark structures as packed (#2047373)
  - core/slice: make slice_freezer_action() return 0 if freezing state is unchanged (#2047373)
  - core/unit: fix use-after-free (#2047373)
  - sd-bus: fix reference counter to be incremented (#2047373)
  - sd-bus: do not read unused value (#2047373)
  - sd-bus: do not return negative errno when unknown name is specified (#2047373)
  - sd-bus: switch to a manual overflow check in sd_bus_track_add_name() (#2047373)
  - spec: Add dependency on timedatex (#2066946)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-60
changelog:
  - unit: don't emit PropertiesChanged signal if adding a dependency to a unit is a no-op (#1948480)
  - tests: make inverted tests actually count (#2087152)
  - TEST-*: make failure tests actually fail on failure (#2087152)
  - ci(Mergify): configuration update (#2087152)
  - core: propagate triggered unit in more load states (#2065322)
  - core: propagate unit start limit hit state to triggering path unit (#2065322)
  - core: Move 'r' variable declaration to start of unit_start() (#2065322)
  - core: Delay start rate limit check when starting a unit (#2065322)
  - core: Propagate condition failed state to triggering units. (#2065322)
  - unit: check for mount rate limiting before checking active state (#2095744)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-61
changelog:
  - mkosi: Add gnutls package (#2101227)
  - unit-name: tighten checks for building valid unit names (#1940973)
  - core: shorten long unit names that are based on paths and append path hash at the end (#1940973)
  - test: add extended test for triggering mount rate limit (#1940973)
  - tests: add test case for long unit names (#1940973)
  - core: unset HOME=/ that the kernel gives us (#2056527)
  - journal-remote: check return value from MHD_add_response_header (#2051981)
  - journalctl: in --follow mode watch stdout for POLLHUP/POLLERR and exit (#2003236)
  - sd-bus: make BUS_DEFAULT_TIMEOUT configurable (#2039461)
  - fstab-generator: fix debug log (#2101433)
  - logind-session-dbus: allow to set display name via dbus (#1857969)
  - Allow restart for oneshot units (#2042896)
  - test: correct TEST-41 StartLimitBurst test (#2042896)
  - core: fix assert() about number of built environment variables (#2049788)
  - core: add one more assert() (#2049788)
  - strv: introduce strv_join_prefix() (#2049788)
  - test: add tests for strv_join_prefix() (#2049788)
  - test: replace swear words by 'hoge' (#2049788)
  - core: add new environment variable $RUNTIME_DIRECTORY= or friends (#2049788)
  - test-execute: add tests for $RUNTIME_DIRECTORY= or friends (#2049788)
  - man: document RUNTIME_DIRECTORY= or friends (#2049788)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-64
changelog:
  - ci: bump the worker Ubuntu version to Jammy (#2087152)
  - test: make test-execute pass on Linux 5.15 (#2087152)
  - ci: install iputils (#2087152)
  - ci(Mergify): Add `ci-waived` logic (#2087152)
  - sd-event: don't invalidate source type on disconnect (#2115396)
  - tests: make sure we delay running mount start jobs when /p/s/mountinfo is rate limited (#2095744)
  - core: drop references to 'StandardOutputFileToCreate' (#2093479)
  - dbus-execute: fix indentation (#2093479)
  - dbus-execute: generate the correct transient unit setting (#2093479)
  - bus-unit-util: properly accept StandardOutput=append:… settings (#2093479)
  - core: be more careful when inheriting stdout fds to stderr (#2093479)
  - test: add a test for StandardError=file:… (#2093479)
  - tree-wide: allow ASCII fallback for → in logs (#2093479)
  - tree-wide: allow ASCII fallback for … in logs (#2093479)
  - core: allow to set default timeout for devices (#1967245)
  - man: document DefaultDeviceTimeoutSec= (#1967245)
  - Revert "core: Propagate condition failed state to triggering units." (#2114005)
  - core: Check unit start rate limiting earlier (#2114005)
  - core: Add trigger limit for path units (#2114005)
  - meson: add syscall-names-update target (#2040247)
  - syscall-names: add process_madvise which is planned for 5.10 (#2040247)
  - shared: add @known syscall list (#2040247)
  - generate-syscall-list: require python3 (#2040247)
  - shared/seccomp: reduce scope of indexing variables (#2040247)
  - shared/syscall-list: filter out some obviously platform-specific syscalls (#2040247)
  - seccomp: tighten checking of seccomp filter creation (#2040247)
  - shared/seccomp-util: added functionality to make list of filtred syscalls (#2040247)
  - nspawn: return ENOSYS by default, EPERM for "known" calls (#2040247)
  - revert: resolved: pin stream while calling callbacks for it (#2110549)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-66
changelog:
  - Try stopping MD RAID devices in shutdown too (#1817706)
  - shutdown: get only active md arrays. (#1817706)
  - scope: allow unprivileged delegation on scopes (#2068575)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-67
changelog:
  - resolved: pin stream while calling callbacks for it (#2110549)
  - ci(functions): Add `useradd` and `userdel` (#2110549)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-68
changelog:
  - logind: optionally watch utmp for login data (#2122288)
  - logind: add hashtable for finding session by leader PID (#2122288)
  - core/load-fragment: move config_parse_sec_fix_0 to src/shared (#2122288)
  - sd-event: add relative timer calls (#2122288)
  - logind: add option to stop idle sessions after specified timeout (#2122288)
  - logind: schedule idle check full interval from now if we couldn't figure out atime timestamp (#2122288)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-69
changelog:
  - logind: optionally watch utmp for login data (#2122288)
  - logind: add hashtable for finding session by leader PID (#2122288)
  - core/load-fragment: move config_parse_sec_fix_0 to src/shared (#2122288)
  - sd-event: add relative timer calls (#2122288)
  - logind: add option to stop idle sessions after specified timeout (#2122288)
  - logind: schedule idle check full interval from now if we couldn't figure out atime timestamp (#2122288)
  - ci(lint): add shell linter - Differential ShellCheck (#2122499)
  - meson: do not compare objects of different types (#2122499)
  - journal-remote: use MHD_HTTP_CONTENT_TOO_LARGE as MHD_HTTP_PAYLOAD_TOO_LARGE is deprecated since 0.9.74 (#2122499)
  - Fix build with µhttpd 0.9.71 (#2122499)
  - ci: replace LGTM with CodeQL (#2122499)
  - ci(mergify): Update policy - Drop LGTM checks (#2122499)
  - time-util: fix buffer-over-run (#2139391)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-70
changelog:
  - basic: recognize pdfs filesystem as a network filesystem (#2094661)
  - core: move reset_arguments() to the end of main's finish (#2127131)
  - manager: move inc. of n_reloading into a function (#2136869)
  - core: Add new DBUS properties UnitsReloadStartTimestamp and UnitsLoadTimestampMontonic (#2136869)
  - core: Indicate the time when the manager started loading units the last time (#2136869)
  - core: do not touch /run/systemd/systemd-units-load from user session instances (#2136869)
  - sysctl: downgrade message when we have no permission (#2158160)
  - core: respect SELinuxContext= for socket creation (#2136738)
  - manager: use target process context to set socket context (#2136738)
  - virt: detect Amazon EC2 Nitro instance (#2117948)
  - machine-id-setup: generate machine-id from DMI product ID on Amazon EC2 (#2117948)
  - virt: use string table to detect VM or container (#2117948)
  - fileio: introduce read_full_virtual_file() for reading virtual files in sysfs, procfs (#2117948)
  - Use BIOS characteristics to distinguish EC2 bare-metal from VMs (#2117948)
  - device: drop refuse_after (#2043524)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-71
changelog:
  - manager: limit access to private dbus socket (#2119405)
  - journalctl: do not treat EINTR as an error when waiting for events (#2161683)
  - core: bring manager_startup() and manager_reload() more inline (#2059633)
  - pam: add a call to pam_namespace (#1861836)
  - virt: Support detection for ARM64 Hyper-V guests (#2158307)
  - virt: Fix the detection for Hyper-V VMs (#2158307)
  - basic: add STRERROR() wrapper for strerror_r() (#2155520)
  - coredump: put context array into a struct (#2155520)
  - coredump: do not allow user to access coredumps with changed uid/gid/capabilities (#2155520)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-72
changelog:
  - test: import logind test from debian/ubuntu test suite (#1866955)
  - test: introduce inst_recursive() helper function (#1866955)
  - tests: verify that Lock D-Bus signal is sent when IdleAction=lock (#1866955)
  - systemctl: simplify halt_main() (#2053273)
  - systemctl: shutdown don't fallback on auth fail (#2053273)
  - systemctl: reintroduce the original halt_main() (#2053273)
  - systemctl: preserve old behavior unless requested (#2053273)
  - pam_systemd: suppress LOG_DEBUG log messages if debugging is off (#2170084)
  - udev/net_id: introduce naming scheme for RHEL-8.8 (#2170499)
  - pam: add a call to pam_namespace (#1861836)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-73
changelog:
  - journald: add API to move logging from /var to /run again (#1873540)
  - journalctl: add new --relinquish and --smart-relinquish options (#1873540)
  - units: automatically revert to /run logging on shutdown if necessary (#1873540)
  - pstore: Tool to archive contents of pstore (#2158832)
  - meson: drop redundant line (#2158832)
  - pstore: drop unnecessary initializations (#2158832)
  - pstopre: fix return value of list_files() (#2158832)
  - pstore: remove temporary file on failure (#2158832)
  - pstore: do not add FILE= journal entry if content_size == 0 (#2158832)
  - pstore: run only when /sys/fs/pstore is not empty (#2158832)
  - pstore: fix use after free (#2158832)
  - pstore: refuse to run if arguments are specified (#2158832)
  - pstore: allow specifying src and dst dirs are arguments (#2158832)
  - pstore: rework memory handling for dmesg (#2158832)
  - pstore: fixes for dmesg.txt reconstruction (#2158832)
  - pstore: Don't start systemd-pstore.service in containers (#2158832)
  - units: pull in systemd-pstore.service from sysinit.target (#2158832)
  - units: drop dependency on systemd-remount-fs.service from systemd-pstore.service (#2158832)
  - units: make sure systemd-pstore stops at shutdown (#2158832)
  - pstore: Run after modules are loaded (#2158832)
  - pstore: do not try to load all known pstore modules (#2158832)
  - logind-session: make stopping of idle session visible to admins (#2156780)
  - journald: Increase stdout buffer size sooner, when almost full (#2029426)
  - journald: rework end of line marker handling to use a field table (#2029426)
  - journald: use the fact that client_context_release() returns NULL (#2029426)
  - journald: rework pid change handling (#2029426)
  - test: Add a test case for #15654 (#2029426)
  - test: Stricter test case for #15654 (Add more checks) (#2029426)
  - man: document the new _LINE_BREAK= type (#2029426)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-74
changelog:
  - journald-server: always create state file in signal handler (#2174645)
  - journald-server: move relinquish code into function (#2174645)
  - journald-server: always touch state file in signal handler (#2174645)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-75
changelog:
  - journald-server: always create state file in signal handler (#2176892)
  - journald-server: move relinquish code into function (#2176892)
  - journald-server: always touch state file in signal handler (#2176892)
  - test: make TEST-35-LOGIN stable again (#2179309)
  - pager: set $LESSSECURE whenver we invoke a pager (#2175624)
  - test-login: always test sd_pid_get_owner_uid(), modernize (#2175624)
  - pager: make pager secure when under euid is changed or explicitly requested (#2175624)
  - ci: trigger differential-shellcheck workflow on push (#2179309)
  - ci: codeql `master` -> `main` (#2179309)
  - test: ignore ENOMEDIUM error from sd_pid_get_cgroup() (#2175622)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-76
changelog:
  - ci(Mergify): drop requirements on linting workflows (#2179309)
  - ci: workflow for gathering metadata for source-git automation (#2179309)
  - ci: first part of the source-git automation - commit linter (#2179309)
  - pstore: fix crash and forward dummy arguments instead of NULL (#2190151)
  - test: Disable LUKS devices from initramfs in QEMU tests (#2190151)
  - pstore: explicitly set the base when converting record ID (#2190151)
  - pstore: avoid opening the dmesg.txt file if not requested (#2190151)
  - test: add a couple of tests for systemd-pstore (#2190151)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-77
changelog:
  - ci: update permissions for source-git automation workflows (#2179309)
  - sulogin: fix control lost of the current terminal when default.target is rescue.target (#2169932)
  - parse-util: in parse_permille() check negative earlier (#2178179)
  - tree-wide: increase granularity of percent specifications all over the place to permille (#2178179)
  - errno-util: introduce ERRNO_IS_TRANSIENT() (#2172846)
  - tree-wide: use ERRNO_IS_TRANSIENT() (#2172846)
  - libsystemd: ignore both EINTR and EAGAIN (#2172846)
  - sd-bus: handle -EINTR return from bus_poll() (#2172846)
  - stdio-bridge: don't be bothered with EINTR (#2172846)
  - sd-netlink: handle EINTR from poll() gracefully, as success (#2172846)
  - resolved: handle -EINTR returned from fd_wait_for_event() better (#2172846)
  - utmp-wtmp: fix error in case isatty() fails (#2172846)
  - utmp-wtmp: handle EINTR gracefully when waiting to write to tty (#2172846)
  - journal-vacuum: count size of all journal files (#2180380)
  - resolved: instead of closing DNS UDP transaction fds right-away, add them to a socket "graveyard" (#2156751)
  - resolved: close UDP socket when we received a network error on it (#2156751)
  - ci: allow RHEL-only labels to mark downstream-only commits (#2179309)
  - man: tweak markup in systemd-pstore.service(8) (#2217786)
  - man: add .service suffix to systemd-pstore(8) (#2217786)
  - presets: enable systemd-pstore.service by default (#2217786)
  - logind: simplify code (#2209328)
  - format-table: add TABLE_TIMESTAMP_UTC and _RELATIVE (#2156786)
  - loginctl: shorten variable name (#2156786)
  - loginctl: use bus_map_all_properties (#2156786)
  - loginctl: show session idle status in list-sessions (#2156786)
  - loginctl: list-sessions: fix timestamp for idle hint (#2156786)
  - loginctl: also show idle hint in session-status (#2156786)
  - core/timer: Always use inactive_exit_timestamp if it is set (#1719364)
  - timer: Use dual_timestamp_is_set() in one more place (#1719364)
  - ci: drop systemd-stable from advanced-commit-linter config (#2179309)
  - core/mount: escape invalid UTF8 char in dbus reply (#2158724)


author: systemd maintenance team <systemd-maint@redhat.com> - 239-78
changelog:
  - login: add a missing error check for session_set_leader() (#2158167)
  - logind: reset session leader if we know for a fact that it is gone (#2158167)
  - test-login: skip consistency checks when logind is not active (#2223582)
  - sd-event: remove dead code and use _cleanup_ (#2211358)
  - sd-event: don't destroy inotify data structures from inotify event handler (#2211358)
  - sd-event: add sd_event_add_inotify_fd() call (#2211358)
  - test: add test case for self-destroy inotify handler (#2211358)
  - doc: add downstream CONTRIBUTING document (#2179309)
  - doc: use link with prefilled Jira issue (#2179309)
  - docs: link downstream CONTRIBUTING in README (#2179309)
  - unit drop-in: Fix ordering of special type.d drop-ins (#2156620)
  - Add failing test to show service.d global drop-in does not get overridden by more specific dropins (#2156620)
  - test: set indentation to 4 spaces (#2156620)
  - test/TEST-15: remove all created unit files (#2156620)
  - test: use quotes where necessary (#2156620)
  - tree-wide: drop manually-crafted message for missing variables (#2156620)
  - manager: reformat boolean expression in unit_is_pristine() (#2156620)
  - manager: allow transient units to have drop-ins (#2156620)
  - TEST-15: allow helper functions to accept other unit types (#2156620)
  - TEST-15: also test hierarchical drop-ins for slices (#2156620)
  - TEST-15: add test for transient units with drop-ins (#2156620)
  - TEST-15: add one more test for drop-in precedence (#2156620)
  - udev/net_id: introduce naming scheme for RHEL-8.9 (#2231846)
  - meson: remove libdw dependency from pstore (#2211416)
  - pstore: introduce tmpfiles.d/systemd-pstore.conf (#2211416)
  - tmpfiles: don't complain if we can't enable pstore in containers (#2211416)
  - pstore: don't enable crash_kexec_post_notifiers by default (#2211416)
  - core: when Delegate=yes is set for a unit, run ExecStartPre= and friends in a subcgroup of the unit (#2215925)
  - man: link Delegate= documentation up with the markdown docs (#2215925)


author: Frank Ch. Eigler <fche@redhat.com> - 4.4-2
changelog:
  - rhbz1898288: stability for exhausted UTRACE_TASK_WORK_POOL
  - rhbz1873492 related: mokutil parser robustness for RH keys


author: Stan Cox <scox@redhat.com> - 4.7-1
changelog:
  - Upstream release, see wiki page below for detailed notes.
    https://sourceware.org/systemtap/wiki/SystemTapReleases


author: Frank Ch. Eigler <fche@redhat.com> - 4.8-2
changelog:
  - rhbz2156092 = rhbz1997192
  - rhbz2145241 = rhbz2145242
  - rhbz2156093 = rhbz2149223
  - rhbz2156095 = rhbz2149666
  - rhbz2156094 = rhbz2154430


author: Pavel Raiskup <praiskup@redhat.com> - 1.30-1
changelog:
  - rebase to latest upstream release, per release notes
    http://lists.gnu.org/archive/html/info-gnu/2017-12/msg00011.html


author: Ondrej Dubaj <odubaj@redhat.com> - 1.30-6
changelog:
  - added "padding with zeros" info message (#1913566)
  - do not report disk error as file shrank (#1913569)


author: Jaroslav Škarvada <jskarvad@redhat.com> - 1:8.6.6-2
changelog:
  - Splitted documentation to the doc subpackage
    Resolves: rhbz#1380291
  - Fixed whitespace
  - Dropped obsoleted defattr


author: Jaroslav Škarvada <jskarvad@redhat.com> - 1:8.6.8-2
changelog:
  - Reverted _module_build macro check which fixes systemtap probes on RHEL-8
    Resolves: rhbz#1579386


author: Michal Ruprich <mruprich@redhat.com> - 14:4.9.2-4
changelog:
  - Removing build-time dependency on sharutils(rhbz#1587877)
  - Changing git dependency to smaller git-core


author: Michal Ruprich <mruprich@redhat.com> - 14:4.9.2-6
changelog:
  - Resolves: #1715423 - tcpdump pre creates user and groups unconditionally
  - Resolves: #1655622 - CVE-2018-19519 Stack-based buffer over-read in print-hncp.c:print_prefix() via crafted pcap


author: Michal Ruprich <mruprich@redhat.com> - 14:4.9.3-2
changelog:
  - Resolves: #1860216 - tcpdump can not parse mptcp options
  - Resolves: #1901635 - ppp decapsulator can be convinced to allocate a large amount of memory
  - Adding tedude test to gating


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 6.20.00-5
changelog:
  - Added multiple upstream patches:
      tcsh-6.20.00-004-do-not-use-old-pointer-tricks.patch
      tcsh-6.20.00-005-reset-fixes-numbering.patch
      tcsh-6.20.00-006-cleanup-in-readme-files.patch
      tcsh-6.20.00-007-look-for-tgetent-in-libtinfo.patch
      tcsh-6.20.00-008-guard-ascii-only-reversion.patch
      tcsh-6.20.00-009-fix-regexp-for-backlash-quoting-tests.patch (bug #1424082)


author: Michal Ruprich <mruprich@redhat.com> - 1:0.17-69
changelog:
  - Resolves: #1445259 - telnet won't build with latest gcc
  - added note about address resolution in manpage


author: Michal Ruprich <mruprich@redhat.com> - 1:0.17-73
changelog:
  - Resolves: #1602711 - Please review important issues found by covscan
  - Resolves: #1637085 - Option -i is missing in telnet in el8 but is available in el7


author: Than Ngo <than@redhat.com> - 7:20180414-12
changelog:
  - texconfig is needed in texconfig-sys, added Requirement texlive-texconfig
  - multilib issue detected by rpmdiff
  - drop obsoleted patch for poppler-0.58
  - XML validity issue
    Related: #1602712


author: Lukáš Zaoral <lzaoral@redhat.com> - 5.2-25
changelog:
  - Fix inconsistent --map-file option spelling in manual (rhbz#2066853)
  - Fix memory corruption in tftpd when filename remapping with macro \x
    is used (rhbz#2066862)


author: Jan Grulich <jgrulich@redhat.com> - 1.10.1-5
changelog:
  - Install the HOWTO file to correct location
  - Add /usr/bin/vncserver file informing users to read the HOWTO.md file
    Resolves: bz#1790443


author: Jan Grulich <jgrulich@redhat.com> - 1.11.0-1
changelog:
  - Update to 1.11.0
    Resolves: bz#1880985
  - Backport fix to allow Tigervnc use boolean values in config files
    Resolves: bz#1883415


author: Jan Grulich <jgrulich@redhat.com> - 1.11.0-2
changelog:
  - Revert removal of vncserver
    Resolves: bz#1897504
  - Correctly start vncsession as a daemon
    Resolves: bz#1897498


author: Jan Grulich <jgrulich@redhat.com> - 1.12.0-4
changelog:
  - Added vncsession-restore script for SELinux policy migration
    Fix SELinux context for root user
    Resolves: bz#2021892


author: Jan Grulich <jgrulich@redhat.com> - 1.13.1-1
changelog:
  - 1.13.1
    Resolves: bz#2175748
  - Restore "--fallbacktofreeport" option in the vncserver script
    Resolves: bz#2174398


author: Jan Grulich <jgrulich@redhat.com> - 1.13.1-2
changelog:
  - xorg-x11-server: X.Org Server Overlay Window Use-After-Free Local Privilege
    Escalation Vulnerability
    Resolves: bz#2180306


author: Petr Pisar <ppisar@redhat.com> - 1.8-1
changelog:
  - 1.8 bump
  - License changed from GPLv2+ to (GPLv3+ and GFDL)
  - Disable printing command failure in POSIX mode


author: Kirill Glebov <kgliebov@redhat.com> - 5-1
changelog:
  - Release v5. Added features and implemented fixes follow. See README.md and
    manpages for documentation of new features.
  - Implement support for --configuration option for all programs.
    The option makes the program output its configuration in JSON and then
    exit.
  - Add BuildDependencies to allow yum-builddep.
  - Open JSON writer file with euid/egid. To allow creating protected log files
    with tlog-rec-session, open the JSON writer's file with the EUID and
    GUID the program was started with.
  - Installing Packages with the APT Addon instead of apt-get.
  - Switch to using TLOG_ERRS_RAISE macros.
  - Fix tlog-play cleanup-path segfault.
  - Modify command-line option parsing.
  - Remove "fields" field from ES query URL to fix compatibility with
    Elasticsearch 5.
  - Remove unused _source parameter from ES query URL.
  - Fix tlog-rec-session file permissions bug.
  - Use CLOCK_MONOTONIC for rate-limiting writing.
  - Filter out some more input control sequences.


author: Justin Stephenson <jstephen@redhat.com> - 6-1
changelog:
  - Release v6. Added features and implemented fixes follow. See README.md and
    manpages for documentation of new features.
  - Add integration tests for end-to-end test coverage.
  - Fix compiler type comparison error with json-c json_object_array_length
    return value.
  - Fix a distribution issue causing incorrect M4_CONF_PATH expansion.
  - Log more detailed error when systemd journal is not present.


author: Justin Stephenson <jstephen@redhat.com> - 7-1
changelog:
  - Release v7
  - Allow tlog-play redirection of stdout
  - Add -i/--interactive option to tlog-rec-session. Allows login
    programs to call tlog-rec-session more transparently.
  - Make in_txt/out_txt fields optional. This handles missing fields
    when reading from Elasticsearch or other backends.


author: Justin Stephenson <jstephen@redhat.com> - 8-1
changelog:
  - Release v8
  - Spec file fixes for EL6
  - Spec file improvements for Debian/Ubuntu pkg-config
  - Tlog-play improve authentication options
  - Handle piped in I/O from stdin and improve the main recording transfer exit
    condition.
  - Use empty string on hostname resolution failure


author: Justin Stephenson <jstephen@redhat.com> - 9-1
changelog:
  - Release v9
  - Add libutempter support
  - Require journal match filter
  - Add file reader match functionality
  - Restore cursor visibility and color attributes on tlog-play exit
  - Add "time" real clock timestamp message field
  - Various upstream CI improvements


author: Justin Stephenson <jstephen@redhat.com> - 11-1
changelog:
  - Fire SIGCHLD after utempter_add_record since it probably eats it.
  - Correct suse rpmbuild
  - Update debbuild for travis CI


author: Justin Stephenson <jstephen@redhat.com> - 12-1
changelog:
  - Release v12
  - Prevent infinite transfer loop on GDM login.
  - tlog-play: add journal namespace support.
  - tlitest: extend delay for limit-action delay test.


author: Justin Stephenson <jstephen@redhat.com> - 12.1
changelog:
  - Exit transfer loop when output fd is closed
  - Revert "Prevent infinite transfer loop on GDM login"


author: Filipe Rosset <rosset.filipe@gmail.com> - 2.5-1
changelog:
  - New upstream release 2.5 - fixes rhbz #1449666
  - https://raw.githubusercontent.com/tmux/tmux/2.5/CHANGES


author: Filipe Rosset <rosset.filipe@gmail.com> - 2.5-4
changelog:
  - Fixes rhbz #1476851 tmux bell-action other not working
  - Fixes rhbz #1476892 tmux update in F26 broke tmuxinator


author: Jindrich Novy <jnovy@redhat.com> - 0.0.99.2-1
changelog:
  - Update to 0.0.99.2
  - Make 'toolbox' create or fall back to a container if possible
  Resolves: #1914687
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 0.0.99.2-2
changelog:
  - Actually apply the patch to make 'toolbox' create or fall back to a
    container if possible
  - Support logging into a registry if necessary
  - Related: #1934415


author: Debarshi Ray <rishi@fedoraproject.org> - 0.0.99.3-2
changelog:
  - Update to 0.0.99.3
  - BuildRequire only systemd-rpm-macros as recommended by the Fedora packaging
    guidelines
  - Update the Summary to match upstream
  - Update the URL to point to the website
  Resolves: #2115089


author: Debarshi Ray <rishi@fedoraproject.org> - 0.0.99.3-2
changelog:
  - Update to 0.0.99.3
  - BuildRequire only systemd-rpm-macros as recommended by the Fedora packaging
    guidelines
  - Update the Summary to match upstream
  - Update the URL to point to the website
  Resolves: #2047290


author: Debarshi Ray <rishi@fedoraproject.org> - 0.0.99.4-3
changelog:
  - Rebuild for CVE-2022-41723, CVE-2023-24534, CVE-2023-24536 and
    CVE-2023-24538
  Resolves: #2187345, #2187368, #2203690


author: Debarshi Ray <rishi@fedoraproject.org> - 0.0.99.4-3
changelog:
  - Rebuild for CVE-2022-41723, CVE-2023-24534, CVE-2023-24536 and
    CVE-2023-24538
  Resolves: #2187343, #2187363, #2203694


author: Honggang Li <honli@redhat.com> - 4.2.10-25
changelog:
  - Rebase to latest Fedora release
  - Fix file conflicts in torque-devel multilib packages
  - Resolve: bz1853167


author: Michal Schmidt <mschmidt@redhat.com> - 1.3.9-1
changelog:
  - Upstream release 1.3.9.
  - Add fixes for build errors with OpenSSL 1.1.
  - Add fixes for NULL cipher context use in seal/unseal.
  - spec file modernization.


author: Javier Martinez Canillas <javierm@redhat.com> - 2.0.0-1
changelog:
  - Download the distributed tarball instead of the source code tarball
  - Update URLs to point to the new project location
  - Update to 2.0.0 release


author: Jerry Snitselaar <jsnitsel@redhat.com> - 3.1.1-4
changelog:
  - lib/tpm2_options: restore TCTI configuration environment variables
  - tpm2_getcap: restore tool output to print properties with TPM_PT prefix
  resolves: rhbz#1648001


author: Jerry Snitselaar <jsnitsel@redhat.com> - 4.1.1-2
changelog:
  - Fix ESYS_TR hierarchy transition.
  - Refactor fix_esys_hierarchies to return actual TSS2_RC return code.
  - tpm2_alg_util.c: fix a bug where the string rsa3072 wasn't being parsed.
  - tpm2_create.c: Fix an issue where userwithauth attr cleared if policy specified.
  - tpm2_hierarchycontrol: Fix bug where hierarchycontrol operation failed silently.
  - tpm2_nvdefine.c: Fix error reporting message.
  - tpm2_policyor: Fix silent failure for invalid/unspecified policy digest alg.
  resolves: rhbz#1854774


author: Jerry Snitselaar <jsnitsel@redhat.com> - 4.1.1-3
changelog:
  - Fix resource leak.
  - Fix to restrict policy digest size.
  - Fix incompatible pointer cast.
  - Fix error message in files_load_##name
  - Fix issue where execution couldn't reach function return.
  resolves: rhbz#1920821


author: Javier Martinez Canillas <javierm@redhat.com> - 1.4.0-1
changelog:
  - Update URLs to point to the new project location
  - Add README.md CHANGELOG.md to %files directive
  - Update to 1.4.0 release (RHBZ#1508870)


author: Yunying Sun <yunying.sun@intel.com> - 2.0.0-1
changelog:
  - Update to 2.0.0 release (RHBZ#1508870)
  - Remove patch file 60-tpm-udev.rules, use upstream tpm-udev.rules instead
  - Disable ESAPI to fix build errors caused by dependency to libgcrypt 1.6.0
  - Add scriptlet to fix Rpath errors
  - Update file installation paths and names accordingly


author: Yunying Sun <yunying.sun@intel.com> - 2.0.0-2
changelog:
  - Re-enable ESAPI since gcrypt dependency is not an issue for Fedora
  - Bump release version to 2.0.0-2


author: Jerry Snitselaar <jsnitsel@redhat.com> - 2.3.2-3
changelog:
  - Add tss user if doesn't exist.
  - Update exported symbols map for libtss2-mu
  - esys: Check object handle node before calling compute_session_value
  - esys: fix resource name calculation
  - esys: fix Esys_StartAuthSession called with optional params
  - esys: fix keysize of ECC curve TPM2_ECC_NISTP224
  - esys: fixup compute_encrypted_salt error handling
  - esys: use memcmp in byte array comparison
  - esys: zero out ctx->salt after startAuthSession_finish
  - mu: Remove use of VLAs for Marshalling TPML types
  - return proper error code on memory allocation failure
  - sys: match counter variable type for cmdAuthsArray->count
  - tcti-device: getPollHandles should allow num_handles query
  - tctildr: fix segmentation fault if name_conf is too big
  resolves: rhbz#1879071 rhbz#1855180


author: Jerry Snitselaar <jsnitsel@redhat.com> - 2.3.2-4
changelog:
  - Fix hmac calculation for tpm2_clear command.
  - Remove private implementation of strndup.
  resolves: rhbz#1920825 rhbz#1940861


author: Kamil Dudka <kdudka@redhat.com> - 1.7.0-11
changelog:
  - do not escape UTF-8 chars in file names by default in UTF-8 locale (#1480778)
  - modernize spec file (Group, BuildRoot, autosetup, clean, defattr)


author: Jerry Snitselaar <jsnitsel@redhat.com> - 0.3.15-1
changelog:
  - Rebase to 0.3.15
  - Fix CVE-2020-24330 CVE-2020-24331 CVE-2020-24332
  resolves: rhbz#1725782 rhbz#1877517 rhbz#1882402 rhbz#1882414


author: Wim Taymans <wtaymans@redhat.com> - 0.3.13-12
changelog:
  - Add explicit Requires for the -libs package.
  - Do NVR bump to move twolame-devel from buildroot to CRB
  - Resolves: rhbz#1843275


author: Jiri Kucera <jkucera@redhat.com> - 2.3-2
changelog:
  - wrudf: Fix parsing Volume Descriptor Sequence
  - wrudf: Exit on allocation failure
    Related: #1882531


author: Nils Philippsen <nils@redhat.com> - 1.2.1-3
changelog:
  - drop requirements on cmake, pkgconfig and rather own the directories for the
    files augmenting these packages


author: Andreas Schneider <asn@redhat.com> - 1.2.2-1
changelog:
  - Update to version 1.2.2:
    * Added support for fork'ed and then exec'ed processes
    * Added support for Alpha


author: Andreas Schneider <asn@redhat.com> - 1.2.4-1
changelog:
  - Update to version 1.2.4
    * Added deadlock workaround for glibc < 2.24
    * Fixed a possible deadlock bug if uid_wrapper is turned off
    * Logging is always turned on now
    * Fixed a memory leak
    * Limited number of groups during fork+exec


author: Kamil Dudka <kdudka@redhat.com> - 2.17-5
changelog:
  - do not update currency.units from network during build
  - units_cur: validate rate data from server (#1598913)


author: Jakub Martisko <jamartis@redhat.com> - 6.0-38
changelog:
  - Fix CVE-2018-1000035 - heap based buffer overflow when opening
    password protected files.
    Resolves: 1537043


author: Jakub Martisko <jamartis@redhat.com> - 6.0-40
changelog:
  - fix several possibly unterminated strings
    When copying to OEM_CP and ISO_CP strings, the string could end unterminated
    (stncpy does not append '\0').
  - Related: #1602721


author: Richard Hughes <rhughes@redhat.com> - 0.99.5-1
changelog:
  - New upstream release
  - Add BatteryLevel property for devices with a finite number of power levels
  - Add support for pausing and resuming of the daemon poll
  - Do not spin in a loop when /proc/timer_stats cannot be written
  - Fix reading and writing the keyboard brightness level
  - Get a serial number for device batteries
  - Refresh devices after waking up from sleep
  - Lower initial power usage when iDevice isn't accessible


author: Richard Hughes <rhughes@redhat.com> - 0.99.6-1
changelog:
  - New upstream release
  - Detect joysticks as gaming input devices
  - Fix crash when '@' is present in the device name
  - Grab the model name from device if unavailable from battery


author: Bastien Nocera <bnocera@redhat.com> - 0.99.7-1
changelog:
  + upower-0.99.7-1
  - Update to 0.99.7
  - Add Bluetooth LE battery support
  - Fix critical action after resume from hibernate


author: Lubomir Rintel <lkundrak@v3.sk> - 2.4.0-2
changelog:
  - Add the previously omitted systemd service file (rh #1352055)
  - Fix crash with invalid arguments (rh #1358472)


author: Attila Lakatos <alakatos@redhat.com> - 0.7.8-4
changelog:
  - RHEL 8.3.0 ERRATUM
  - Spec file clean up
  - Rebase to 0.7.8
  Resolves: rhbz#1738590
  - Added selinux subpackage
  Resolves: rhbz#1683567
  - Added notifier subpackage
  - Installing /etc/usbguard/rules.d/
  Resolves: rhbz#1667395
  - Fixed sigwaitinfo handling
  Resolves: rhbz#1835210


author: Radovan Sroka <rsroka@redhat.com> - 0.7.8-5
changelog:
  - RHEL 8.3.0 ERRATUM
  - Use old-fasioned forking style in unit file
  Resolves: rhbz#1846885
  - Allow usbguard to read /proc/cpuinfo
  Resolves: rhbz#1847870
  - Removed notifier's Requires for usbguard-devel
  Resolves: rhbz#1667395
  - Allow usbguard to read /dev/urandom
  Resolves: rhbz#1848618


author: Radovan Sroka <rsroka@redhat.com> - 0.7.8-6
changelog:
  - RHEL 8.3.0 ERRATUM
  - Removed execstack from .spec
  - Removed AuthorizedDefault=wired from the usbguard
  Resolves: rhbz#1852539
  - Missing error message on bad configuration
  Resolves: rhbz#1857299
  - /etc/usbguard/usbguard-daemon.conf file does not contain all default options
  Resolves: rhbz#1862907


author: Attila Lakatos <alakatos@redhat.com> - 1.0.0-1
changelog:
  - Rebase to 1.0.0
  Resolves: rhbz#1887448
  - Filtering rules by attribute
  Resolves: rhbz#1873953
  - Change device policy of multiple devices using rule instead of ID
  Resolves: rhbz#1852568


author: Zoltan Fridrich <zfridric@redhat.com> - 1.0.0-8
changelog:
  - change usbguard icon injection
  - fix DSP module definition in spec file
  Resolves: rhbz#2014441
  - add execstack to spec
  - remove IPAddressDeny from usbguard service
  Resolves: rhbz#1929364
  - fix file conflict when installing usbguard on rhel
  Resolves: rhbz#1963271
  - fix IPC access control files override
  Resolves: rhbz#2004511
  - validate ACL permission existence
  Resolves: rhbz#2005020
  - decrease usbguard-notifier spam when denied connection
  Resolves: rhbz#2000000


author: Attila Lakatos <alakatos@redhat.com> - 1.0.0-10
changelog:
  - Fix unauthorized access via D-bus
  - Fix memory leaks on connection failure to D-bus
  Resolves: rhbz#2059067


author: Attila Lakatos <alakatos@redhat.com> - 1.0.0-13
changelog:
  - Set OOMScoreAdjust to -1000 in service file
  Resolves: rhbz#2159411
  - Fix race condition in usbguard-daemon when forking
  Resolves: rhbz#2159409
  - Add missing files to documentation
  Resolves: rhbz#2159412
  - Disable logging to console, logging to syslog is still enabled
  - Store permanent rules even if RuleFile is not set but RuleFolder is
  - Neither RuleFolder nor RuleFile exists bugfix
  Resolves: rhbz#2159413
  - Remove build for i686 arch
  Resolves: rhbz#2105091


author: Zoltan Fridrich <zfridric@redhat.com> - 1.0.0-4
changelog:
  - add execstack to spec
  - remove IPAddressDeny from usbguard service
  Resolves: rhbz#1929364
  - fix file conflict when installing usbguard on rhel
  Resolves: rhbz#1963271
  - fix IPC access control files override
  Resolves: rhbz#2004511
  - validate ACL permission existence
  Resolves: rhbz#2005020
  - decrease usbguard-notifier spam when denied connection
  Resolves: rhbz#2000000


author: Zoltan Fridrich <zfridric@redhat.com> - 1.0.0-5
changelog:
  - fix DSP module definition in spec file
  Resolves: rhbz#2014441
  - add execstack to spec
  - remove IPAddressDeny from usbguard service
  Resolves: rhbz#1929364
  - fix file conflict when installing usbguard on rhel
  Resolves: rhbz#1963271
  - fix IPC access control files override
  Resolves: rhbz#2004511
  - validate ACL permission existence
  Resolves: rhbz#2005020
  - decrease usbguard-notifier spam when denied connection
  Resolves: rhbz#2000000


author: Bastien Nocera <bnocera@redhat.com> - 1.1.0-13
changelog:
  + usbmuxd-1.1.0-13
  - Fix usbmuxd not starting up a second time, and properties being lost
    with kernel >= 4.12


author: Victor Toso <victortoso@redhat.com> - 0.12.0-3
changelog:
  - Fixes 100% CPU usage when usbredirect used as TCP server.
    Related: rhbz#2157521
  - Fixes USB redirection of identical devices.
    Resolves: rhbz#2157521


author: Miloslav Trmač <mitr@redhat.com> - 1.111-10
changelog:
  - Fix a FBFS with  -Werror=format-security
    Resolves #1444750
  - Fix inconsistent dates in %changelog


author: Jiri Kucera <jkucera@redhat.com> - 1.112-2
changelog:
  - Dropped need to run autotools
  - <sys/sysmacros.h> must be now included manually
    Resolves #1611752
  - Fixed bad FSF address


author: Jiri Kucera <jkucera@redhat.com> - 1.113-2
changelog:
  - Fix typo in pam-panel-icon manpage
    Do not use deprecated selinux API
    Do not use fexecve
    Resolves: #1775931


author: Benjamin Marzinski <bmarzins@redhat.com> - 0.10.1-3
changelog:
  - Replace arch-dependent /usr/include/urcu/config.h with arch-independent
    stub when needed. (bz #1853168)
  - Added CI gating tests (bz #1682555)
  - Resolves: bz #1682555, #1853168


author: James Antill <james@fedoraproject.org> - 1.0.4-20
changelog:
  - Move doc/ustr-devel-<version> to doc/ustr-devel. BZ 993940.
  - Use -fgnu89-inline workaround for gcc5.


author: Matias Kreder <mkreder@gmail.com> - 1.6.2-34
changelog:
  - Removed uuid-php subpackage since php(api) is no longer provided on
  - PHP 7 and there is a replacement (pecl/uuid extension)


author: Mark Wielaard <mjw@redhat.com> - 3.17.0-5
changelog:
  - Add valgrind-3.17.0-s390-prep.patch
  - Add valgrind-3.17.0-s390-z15.patch
  - Add valgrind-3.17.0-s390-z13-vec-fix.patch


author: Mark Wielaard <mjw@redhat.com> - 3.18.1-5
changelog:
  - Add valgrind-3.18.1-dhat-tests-copy.patch
  - Add valgrind-3.18.1-s390x-EXRL.patch
  - Add valgrind-3.18.1-ppc64-lxsibzx-lxsihzx.patch
  - Add valgrind-3.18.1-ppc-pstq.patch
  - Add valgrind-3.18.1-ppc-pstq-tests.patch
  - Add valgrind-3.18.1-gdbserver_tests-hwcap.patch
  - Add valgrind-3.18.1-rust-v0-demangle.patch
  - Add valgrind-3.18.1-arm64-doubleword-cas.patch
  - Add valgrind-3.18.1-arm64-ldaxp-stlxp.patch
  - Add valgrind-3.18.1-arm64-atomic-align.patch
  - Add valgrind-3.18.1-amd64-more-spec-rules.patch
  - Add valgrind-3.18.1-condvar.patch
  - Add valgrind-3.18.1-demangle-namespace.patch


author: Mark Wielaard <mjw@redhat.com> - 3.21.0-2
changelog:
  - Upgrade to upstream 3.21.0
  - Remove upstreamed patches
  - Add valgrind-3.21.0-no-memcpy-replace-check.patch


author: Mark Wielaard <mjw@redhat.com> - 3.21.0-7
changelog:
  - Add valgrind-3.21.0-callgrind_control-no-strict.patch
  - Add valgrind-3.21.0-realloc-again.patch
  - Update valgrind-3.21.0-no-memcpy-replace-check.patch (memcpy_chk)
  - Add valgrind-3.21.0-vgm.patch and valgrind-3.21.0-vgm-tests.patch
  - Add valgrind-3.21.0-pgste.patch


author: Lubos Uhliarik <luhliari@redhat.com> - 0.15.0-1
changelog:
  - updated to newer version (0.15.0)
  - Drop EPEL and older Fedora releases support
  - Drop broken manual ABI dependency to Varnish
  - Drop commented out references to past patches
  - Verbose test suite
  - Simplified configure step
  - Dependencies cleanup


author: - Andy Walsh <awalsh@redhat.com> - 6.2.1.102-11
changelog:
  - Added bash command completion for the vdo command.
    - Resolves: rhbz#1540287
  - Modified the vdo script's list command to not display VDO devices which
    were not created with the vdo command (i.e. via LVM or using raw dm
    commands).
    - Resolves: rhbz#1686091
  - Modified vdostats to continue to work on VDO devices which were not
    created with the vdo script.
    - Resolves: rhbz#1686091
  - Modified vdo script to always close the UDS index when disabling
    deduplication on a running VDO device.
    - Resolves: rhbz#1643291


author: - Andy Walsh <awalsh@redhat.com> - 6.2.1.134-11
changelog:
  - Added UUID filtering of underlying devices when running vdo create with
    the --force flag as this failed when run on certain PVs.
  - Resolves: rhbz#1710017


author: - Andy Walsh <awalsh@redhat.com> - 6.2.2.18-11
changelog:
  - Added the ability to modify the UUID of a VDO device.
  - Resolves: rhbz#1713749
  - Added an import command to the vdo script to allow management of an
    existing VDO device which is not already in the vdo config file.
  - Resolves: rhbz#1737619
  - Modified the vdo script to warn the user when starting or stopping a VDO
    device if the device is already in the desired state.
  - Resolves: rhbz#1738651


author: - Andy Walsh <awalsh@redhat.com> - 6.2.2.24-11
changelog:
  - Began preparations for releasing more VDO analysis and debugging tools.
  - Relates: rhbz#1687996
  - Really added the ability to modify the UUID of a VDO device (the previous
    version omitted some of the files necessary for this feature).
  - Resolves: rhbz#1713749


author: - Andy Walsh <awalsh@redhat.com> - 6.2.2.33-12
changelog:
  - Fixed bug in the import command of the vdo script which would fail if
    there were no active dm devices.
  - Resolves: rhbz#1767491
  - Added a version command to the vdo script to report the script version.
  - Resolves: rhbz#1730429
  - Added version options to vdo utilities which did not have one.
  - Resolves: rhbz#1730429
  - Removed deprecated vdoprepareupgrade utility.
  - Resolves: rhbz#1774700


author: - Andy Walsh <awalsh@redhat.com> - 6.2.2.117-13
changelog:
  - Improved man pages and help text for vdo script and vdo utilities.
  - Resolves: rhbz#1505748
  - Resolves: rhbz#1636043
  - Resolves: rhbz#1746539
  - Modified vdoformat to display the maximum VDO size based on the
    configured slab size when formatting a volume. Modified vdo script to
    also display this output when creating a new VDO.
  - Resolves: rhbz#1659173


author: - Andy Walsh <awalsh@redhat.com> - 6.2.3.91-14
changelog:
  - Removed unused UDS bio statistics
  - Resolves: rhbz#1827762
  - Added a summary mode to vdoaudit and made this mode the default. Also
    added histograms.
  - Resolves: rhbz#1687996
  - Modified vdostats to accept short (one character) options.
  - Resolves: rhbz#1787472
  - Modified vdo script to use lsblk to identify LVM created VDO volumes.
  - Resolves: rhbz#1825344
  - Modified vdo script to avoid unnecessary config file updates when
    removing VDO volumes.
  - Resolves: rhbz#1804440
  - Fixed a cast which caused a Coverity complaint.
  - Resolves: rhbz#1827763
  - Fixed a cut&paste error in the vdosetuuid man page.
  - Resolves: rhbz#1643297
  - Fixed documentation of logical threads.
  - Resolves: rhbz#1827764
  - Began creation of a package of binaries for investigating VDO issues.
  - Resolves: rhbz#1643297
  - Updated VDO to use udev/systemd rules for startup.
  - Resolves: rhbz#1837759
  - Modified VDO volume creation to use libblkid instead of pvcreate to
    determine whether the underlying storage is already in use. Moved
    these checks from the vdo script into the vdoformat utility.
  - Resolves: rhbz#1771698
  - Modified the vdo status command to treat a running vdo volume is
    authoratative over the config file.
  - Resolves: rhbz#1790983
  - Added a new utility, vdoregenerategeometry, which can be used to
    recover a VDO whose initial blocks have been overwritten
    accidentaly.
  - Resolves: rhbz#1773421


author: - Andy Walsh <awalsh@redhat.com> - 6.2.3.100-14
changelog:
  - Modified vdoformat to display the minimum required physical size for the
    specified parameters if the format fails due to insufficient space.
  - Resolves: rhbz#1683945
  - Modified the vdo status command to report values from running devices
    rather than the config file when the devices are running.
  - Resolves: rhbz#1790983
  - Actually made the new summary mode of vdoaudit the default.
  - Resolves: rhbz#1687996
  - Fixed a bug in vdodumpmetadata and vdodumpblockmap which could result in
    the wrong block(s) being dumped.
  - Resolves: rhbz#1643297


author: - Andy Walsh <awalsh@redhat.com> - 6.2.4.14-14
changelog:
  - Added --pending option to the vdo status command to indicate
    configuration options which have been modified but will not take
    effect until the next device start.
  - Resolves: rhbz#1838314


author: - Andy Walsh <awalsh@redhat.com> - 6.2.5.11-14
changelog:
  - Introduced new memory size parameter values for UDS indexes which have
    been converted from vdo script management to LVM.
  - Related: rhbz1928284
  - Modified vdo script to fail if the same option is supplied multiple
    times.
  - Resolves: rhbz#1944087
  - Fixed permissions on the vdo script's lock directory.
  - Resolves: rhbz#1952105


author: - Andy Walsh <awalsh@redhat.com> - 6.2.5.21-14
changelog:
  - Added a tool for converting a VDO volume from the vdo management script
    to LVM. The tool can be invoked from the new vdo convert command.
  - Related: rhbz#1928284
  - Fixed a (relatively harmless) buffer overflow in vdo userspace tools.
  - Resolves: rhbz#1927938


author: - Andy Walsh <awalsh@redhat.com> - 6.2.5.41-14
changelog:
  - Integrated the vdo to lvm conversion tool into the vdo management script
    and modified the tool itself to correctly convert the UDS index so that
    dedupe information is not lost by conversion.
  - Resolves: rhbz#1928284


author: - Andy Walsh <awalsh@redhat.com> - 6.2.5.62-14
changelog:
  - Removed extraneous fields from the super block of a converted index.
  - Resolves: rhbz#1965546
  - Added a parameter to the lvm conversion tool to specify the amount of
    space to free up.
  - Resolves: rhbz#1966827
  - Fixed calculation of the number of expiring chapters in a converted
    index.
  - Resolves: rhbz#1975546


author: - Andy Walsh <awalsh@redhat.com> - 6.2.5.74-14
changelog:
  - Renamed vdo2LVM to vdopreparelvm and moved its installation location to
    /usr/libexec so that it is not in common default paths as this utility is
    intended to be called from LVM, not directly by users.
  - Related: rhbz#1986930


author: - Andy Walsh <awalsh@redhat.com> - 6.2.6.3-14
changelog:
  - Added a check to vdopreparelvm to determine whether it has already been
    converted.
  - Resolves: rhbz#2017843


author: - Andy Walsh <awalsh@redhat.com> - 6.2.6.7-14
changelog:
  - Fixed bugs in the vdopreparelvm check to determine whether a device has
    already been converted.
  - Resolves: rhbz#2017843
  - Fixed an issue in the vdo-by-dev tool which could result in a failure to
    start vdo devices when some devices in the vdo config file do not exist.
  - Resolves: rhbz#2022154


author: - Andy Walsh <awalsh@redhat.com> - 6.2.6.14-14
changelog:
  - Added a tool to make LVMVDO pools read/write so that support and
    debugging tools may access them.
  - Resolves: rhbz#1999640


author: - Andy Walsh <awalsh@redhat.com> - 6.2.7.17-14
changelog:
  - Fixed excessive vdo2lvm "Retrying" messages.
  - Resolves: rhbz#1986595
  - Fixed a pylint 2+ complaint in the vdo scripts.
  - Resolves: rhbz#2072131
  - Updated vdo script documentation and help text for the uuid option.
  - Resolves: rhbz#2089957


author: Richard W.M. Jones <rjones@redhat.com> - 0.5-17
changelog:
  - Remove ldconfig
    https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org/thread/SU3LJVDZ7LUSJGZR5MS72BMRAFP3PQQL/


author: Zdenek Dohnal <zdohnal@redhat.com> - 2:8.0.1763-8
changelog:
  - 1640919 - augroup fedora, test case failure: /CoreOS/vim/Regression/bz241308-use-augroup-for-rh-autocmds


author: Zdenek Dohnal <zdohnal@redhat.com> - 2:8.0.1763-16
changelog:
  - 2004974 - CVE-2021-3796 vim: use-after-free in nv_replace() in normal.c [rhel-8.5.0]
  - 2004891 - CVE-2021-3778 vim: heap-based buffer overflow in utf_ptr2char() in mbyte.c [rhel-8.5.0]


author: Zdenek Dohnal <zdohnal@redhat.com> - 2:8.0.1763-16.3
changelog:
  - 2028341 - CVE-2021-3984 vim: illegal memory access when C-indenting could lead to Heap Buffer Overflow [rhel-8.6.0]
  - 2028430 - CVE-2021-4019 vim: heap-based buffer overflow in find_help_tags() in src/help.c [rhel-8.6.0]


author: Zdenek Dohnal <zdohnal@redhat.com> - 2:8.0.1763-16.4
changelog:
  - CVE-2021-4193 vim: vulnerable to Out-of-bounds Read
  - CVE-2021-4192 vim: vulnerable to Use After Free


author: Zdenek Dohnal <zdohnal@redhat.com> - 2:8.0.1763-16.5
changelog:
  - CVE-2022-0261 vim: Heap-based Buffer Overflow in block_insert() in src/ops.c
  - CVE-2022-0318 vim: heap-based buffer overflow in utf_head_off() in mbyte.c


author: Tomas Korbar <tkorbar@redhat.com> - 2:8.0.1763-16.8
changelog:
  - CVE-2022-0392 vim: heap-based buffer overflow in getexmodeline() in ex_getln.c
  - Resolves: rhbz#2049403


author: Tomas Korbar <tkorbar@redhat.com> - 2:8.0.1763-16.9
changelog:
  - CVE-2022-0392 vim: heap-based buffer overflow in getexmodeline() in ex_getln.c
  - Improve fix
  - Resolves: rhbz#2049403


author: Tomas Korbar <tkorbar@redhat.com> - 2:8.0.1763-16.11
changelog:
  - CVE-2022-0413 vim: use after free in src/ex_cmds.c
  - Fix specfile problems
  - Resolves: rhbz#2048525


author: Zdenek Dohnal <zdohnal@redhat.com> - 2:8.0.1763-18
changelog:
  - fix test suite after fix for CVE-2022-0318
  - CVE-2022-0359 vim: heap-based buffer overflow in init_ccline() in ex_getln.c


author: Zdenek Dohnal <zdohnal@redhat.com> - 2:8.0.1763-18
changelog:
  - CVE-2022-0392 vim: heap-based buffer overflow in getexmodeline() in ex_getln.c
  - CVE-2022-0413 vim: use after free in src/ex_cmds.c


author: Zdenek Dohnal <zdohnal@redhat.com> - 2:8.0.1763-19.3
changelog:
  - CVE-2022-1785 vim: Out-of-bounds Write
  - CVE-2022-1897 vim: out-of-bounds write in vim_regsub_both() in regexp.c
  - CVE-2022-1927 vim: buffer over-read in utf_ptr2char() in mbyte.c


author: Marek Kasik <mkasik@redhat.com> - 3.22.0-22
changelog:
  - Rebuild due to new version of FreeRDP
  - Fix an issue when RDP connection shows just black screen
  - Resolves: #1839744


author: Eduardo Lima (Etrunko) <etrunko@redhat.com> - 9.0-1
changelog:
  - Rebase to latest upstream
    Resolves: rhbz#1837489
  - Do not filter out DATA storage domains
    Resolves: rhbz#1835640


author: Uri Lublin <uril@redhat.com> - 9.0-5
changelog:
  - More specific key accelerator description for cursor release
    Resolves: rhbz#1548371
  - Report detailed error when file transfer fails
    Resolves: rhbz#1753563
  - Update copyright year in "about ui"
    Resolves: rhbz#1848267
  - Show an error dialog upon vnc-error
    Resolves: rhbz#1448151
  - Fix warning by Coverity
    Resolves: rhbz#1876719


author: Richard W.M. Jones <rjones@redhat.com> - 1.18-1
changelog:
  - New upstream version 1.18.
  - Update RPM description section with complete list of supported guests.
  - If ‘make check’ fails, dump ‘test-suite.log’.


author: Richard W.M. Jones <rjones@redhat.com> - 1.18-8
changelog:
  - Add support for Nutanix AHV
    resolves: rhbz#1756381
  - Add all patches since 1.18 was released, up to 1.20 and beyond.


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 0.3.9-16
changelog:
  - Python 2 binary package renamed to python2-volume_key
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Jiri Kucera <jkucera@redhat.com> - 0.3.11-4
changelog:
  - fixed License
  - Requires: /usr/bin/gpg2 in libs subpackage
  - Added support for opening all types of LUKS devices
    Resolves: #1626974


author: Ondřej Lysoněk <olysonek@redhat.com> - 3.0.3-25
changelog:
  - Add config option log_die allowing to pass error messages to syslog
  - Add config option bind_retries allowing to change the max number
  - of attempts to find a listening port for the PASV/EPSV command
  - Resolves: rhbz#1318198


author: Ondřej Lysoněk <olysonek@redhat.com> - 3.0.3-32
changelog:
  - Removed a hint about the ftp_home_dir SELinux boolean from the config file
  - Resolves: rhbz#1623424


author: Artem Egorenkov <aegorenk@redhat.com> - 3.0.3-33
changelog:
  - Enable support for wide-character strings in logs
  - Replace unprintables with HEX code, not question marks
  - Resolves: rhbz#1947900


author: Michael Catanzaro <mcatanzaro@redhat.com> - 2.30.2-2
changelog:
  - Try to fix coverity build by disabling docs (thanks to Kamil Dudka <kdudka@redhat.com>!)
  - Related: #1883304


author: Michael Catanzaro <mcatanzaro@redhat.com> - 2.36.1-1
changelog:
  - Update to 2.36.1
    Related: #2061994
  - Resolves: #2075492
  - Resolves: #2075494
  - Resolves: #2075496


author: Michael Catanzaro <mcatanzaro@redhat.com> - 2.38.5-1.4
changelog:
  - Add patch for CVE-2023-28204
    Resolves: #2209744
  - Add patch for CVE-2023-32373
    Resolves: #2209727


author: Michael Catanzaro <mcatanzaro@redhat.com> - 2.40.5-1
changelog:
  - Upgrade to 2.40.5. Also, disable JIT
    Resolves: #2176269
    Resolves: #2185742
    Resolves: #2209728
    Resolves: #2209745
    Resolves: #2218649
    Resolves: #2218651
    Resolves: #2224611


author: Brian C. Lane <bcl@redhat.com> - 35.3-1
changelog:
  - New release: 35.3 (bcl)
  - spec: Adjust build methods for RHEL 8 (bcl)
  - github: Run build-in-podman to test building package (bcl)
  - spec: Use v2 module (bcl)
  - Makefile: Use v2 module (bcl)
  - Makefile: Add a build-in-podman target (bcl)
  - tests: Add JSON and error result testing to status (bcl)
  - tests: Add JSON and error result testing to sources (bcl)
  - tests: Add JSON and error result testing to projects (bcl)
  - tests: Add JSON and error result testing to modules (bcl)
  - tests: Add JSON and error result testing to distros (bcl)
  - tests: Add JSON and error result testing to compose (bcl)
  - tests: Add JSON and error result testing to blueprints (bcl)
  - test: Fix test client setup and output capture code (bcl)
  - test: Close output capture in printwrap_test (bcl)
  - test: reset the root flags on every ExecuteTest call (bcl)
  - status: Use ExecutionErrors for API errors (bcl)
  - sources: Use ExecutionErrors for API errors (bcl)
  - projects: Use ExecutionErrors for API errors (bcl)
  - modules: Use ExecutionErrors for API errors (bcl)
  - distros: Use ExecutionErrors for API errors (bcl)
  - compose: Use ExecutionErrors for API errors (bcl)
  - blueprints: Use ExecutionErrors for API errors (bcl)
  - composer-cli: Turn off normal command Stdout when --json is used (bcl)
  - weldr: Fix Stringer interface on API messages (bcl)
  - weldr: Clean up error message return code (bcl)
  - weldr: Move Unmarshal error to error position (bcl)
  - root: Add a helper function to print a list of errors (bcl)
  - Use GetFilePath for ComposeImage (bcl)
  - Use GetFilePath for ComposeResults (bcl)
  - Use GetFilePath for ComposerMetadata (bcl)
  - Use GetFilePath for ComposeLogs (bcl)
  - weldr: Add GetFilePath to download a file to a path (bcl)
  - Creating v2 module for breaking API changes (bcl)
  - Makefile: Add update-mods target (bcl)
  - vendor: Update the modules and vendor directory (bcl)
  - Bump go version to 1.15 (bcl)
  - Limit dependabot to 1 PR (bcl)
  - Enable Dependabot service (atodorov)
  - tests: Fix integration tests (bcl)


author: Brian C. Lane <bcl@redhat.com> - 35.5-1
changelog:
  - New release: 35.5 (bcl)
    Resolves: rhbz#2052604
  - docs: Explain how to undo blueprints delete (bcl)
  - test: server status no longer returns devel (bcl)
  - Use GetFrozenBlueprintsTOML for blueprints freeze save (bcl)
  - Add a test for float uid/gid in frozen blueprint (bcl)
  - Use GetBlueprintsTOML for blueprints save (bcl)
  - test: Add a test for float uid/gid in saved blueprint (bcl)
  - build(deps): bump github.com/BurntSushi/toml from 0.4.1 to 1.0.0 (49699333+dependabot[bot])
  - tests: trigger on push to main (jrusz)
  - build(deps): bump github.com/spf13/cobra from 1.2.1 to 1.3.0 (49699333+dependabot[bot])
  - ci: add keystore for sonarqube (jrusz)
  - spec: Switch to using %gobuild macro on Fedora (bcl)
  - ci: change workflow name (jrusz)
  - ci: add gitlab-ci and sonarqube (jrusz)
  - doc: fix example links from the README (tdecacqu)
  - build(deps): bump actions/checkout from 2.3.4 to 2.4.0 (49699333+dependabot[bot])
  - ci: Enable Coverity Scan tool (atodorov)


author: Brian C. Lane <bcl@redhat.com> - 35.9-1
changelog:
  - Copy rhel-88.json test repository from osbuild-composer
  - Update osbuild-composer test repositories from osbuild-composer
  - New release: 35.9 (bcl)
    Resolves: rhbz#2168666
  - tests: Replace os.MkdirTemp with t.TempDir (bcl)
  - blueprint save: Allow overriding bad blueprint names (bcl)
  - tests: Clean up checking err in tests (bcl)
  - composer-cli: Implement blueprints diff (bcl)
  - saveBlueprint: Return the filename to the caller (bcl)
  - composer-cli: Add tests for using --commit with old servers (bcl)
  - weldr: Return error about the blueprints change route (bcl)
  - weldr: Save the http status code as part of APIResponse (bcl)
  - Add --commit support to blueprints save (bcl)
  - Add --commit to blueprints show (bcl)
  - gitleaks: Exclude the test password used in tests (bcl)
  - ci: add tags to AWS instances (tlavocat)
  - Update github.com/BurntSushi/toml to 1.2.1
  - Update github.com/stretchr/testify to 1.8.1
  - Update bump github.com/spf13/cobra to 1.6.1
  - New release: 35.8 (bcl)
  - completion: Remove providers from bash completion script (bcl)
  - completion: Filter out new headers from compose list (bcl)
  - docs: Remove unneeded Long descriptions (bcl)
  - docs: Use a custom help template (bcl)
  - docs: Add more command documentation (bcl)
  - cmdline: Add package glob support to modules list command (bcl)
  - workflow: Add govulncheck on go v1.18 (bcl)
  - tests: Update to use golangci-lint 1.49.0 (bcl)
  - New release: 35.7 (bcl)
  - spec: Move %gometa macro above %gourl (bcl)
  - weldr: When starting a compose pass size as bytes, not MiB (bcl)
  - tests: Use correct size value in bytes for test (bcl)
  - workflow: Add Go 1.18 to text matrix (bcl)
  - Replace deprecated ioutil functions (bcl)
  - New release: 35.6 (bcl)
  - tests: Update tests for osbuild-composer changes (bcl)
  - CMD: Compose status format (eloy.coto)
  - CMD: Compose list format (eloy.coto)
  - tests: Update tests to check for JSON list output (bcl)
  - composer-cli: Change JSON output to be a list of objects (bcl)
  - weldr: Simplify the old ComposeLog, etc. functions (bcl)
  - composer-cli: Add --filename to blueprints freeze save command (bcl)
  - composer-cli: Add --filename to blueprints save command (bcl)
  - composer-cli: Add --filename to compose logs command (bcl)
  - composer-cli: Add --filename to compose image command (bcl)
  - composer-cli: Add --filename to compose metadata command (bcl)
  - composer-cli: Add --filename to compose results command (bcl)
  - weldr: Add saving to a new filename to GetFilePath function (bcl)
  - github: Fix issue with codecov and forced pushes in PRs (bcl)
  - Use golangci-lint 1.45.2 in workflow (bcl)
  - Run workflow tests for go 1.16.x and 1.17.x (bcl)
  - Move go.mod to go 1.16 (bcl)
  - workflows/trigger-gitlab: run Gitlab CI in new image-builder project (jrusz)
  - Update GitHub actions/setup-go to 3
  - Update GitHub actions/checkout to 3


author: Jason L Tibbitts III <tibbs@math.uh.edu> - 2.21-8
changelog:
  - Fix invalid [ ... ] syntax which results in complaints by zsh.
    https://bugzilla.redhat.com/show_bug.cgi?id=1546221
  - Remove pointless Group tag, buildroot cleaning and %defattr.


author: Than Ngo <than@redhat.com> - 2.21-17
changelog:
  - Resolves: #2025709, check shell correctly 
  - Resolves: #2009547, which treats function contents as aliases when parsing ksh


author: Michal Ruprich <mruprich@redhat.com> - 1:2.6.2-7
changelog:
  - Resolves: #1642919 - CVE-2018-12086, CVE-2018-18225, CVE-2018-18226, CVE-2018-18227
  - Resolves: #1656342 - CVE-2018-19623
  - Resolves: #1657634 - CVE-2018-19625
  - Resolves: #1657211 - CVE-2018-19626
  - Resolves: #1657184 - CVE-2018-19627
  - Resolves: #1657190 - CVE-2018-19628
  - fixes CVE-2018-19622, CVE-2018-19624


author: Michal Ruprich <mruprich@redhat.com> - 1:2.6.2-15
changelog:
  - Resolves: #2119126 - Wireshark source rpm fails to build due to looking for incorrect libssh header files


author: Michal Ruprich <mruprich@redhat.com> - 1:2.6.2-16
changelog:
  - Resolves: #2210866 - VMS TCPIPtrace file parser crash
  - Resolves: #2210867 - NetScaler file parser crash
  - Resolves: #2210869 - RTPS dissector crash


author: Davide Caratti <dcaratti@redhat.com> - 1:2.9-2
changelog:
  - Fix AP mode PMF disconnection protection bypass (CVE-2019-16275)
  - Fix NULL dereference in d-bus handler when P2P control interface is removed (rh #1752780)
  - enable WIFI_DISPLAY (rh #1755941)


author: Davide Caratti <dcaratti@redhat.com> - 1:2.9-3
changelog:
  - fix p2p_listen unexpectedly stopped after 5 seconds (rh #1693684)
  - allow changing 'bridge' via D-Bus (rh #1888050)
  - expose OWE configurability via D-Bus (rh #1888718)


author: Davide Caratti <dcaratti@redhat.com> - 1:2.9-5
changelog:
  - P2P: Fix a corner case in peer addition based on PD Request (CVE-2021-27803)
  - Fix buffer overflow when processing P2P group information (CVE-2021-0326)


author: Davide Caratti <dcaratti@redhat.com> - 1:2.6-15
changelog:
  - Disable build of wpa_gui (rh #1542234)
  - Fix build issue with latest kernel headers (rh #1582604)
  - Disable WEXT (rh #1537143)
  - Fix memory leak when macsec MKA/PSK is used (rh #1582511)
  - Fix authentication failure when the MAC is updated externally (rh #1582508)
  - Let the kernel discard EAPOL if packet type is PACKET_OTHERHOST (rh #1582501)


author: Tomas Popela <tpopela@redhat.com> - 1.6.0-5
changelog:
  - Drop PipeWire 0.2 requirement as Chrom[e|ium] 90 now depends on PipeWire 0.3
  - Resolves: rhbz#1949809


author: Jonas Ådahl <jadahl@redhat.com> - 1.6.0-1
changelog:
  - Rebase to 1.6.0 (#1837413)
  - Bump supported Mutter screen cast API version (#1837413)
  - Backport bugfix (#1837413)


author: Debarshi Ray <rishi@fedoraproject.org> - 1.8.0-1
changelog:
  - Rebase to 1.8.0
  - Remove unnecessary non-arch-specific explicit library Requires
  Resolves: #2062432


author: Pavel Reichl <preichl@redhat.com> - 3.1.8-5
changelog:
  - xfsrestore: Files from the backup go to orphanage dir because of xfsdump issue
  - related: bz#2055289


author: Pavel Reichl <preichl@redhat.com> - 3.1.8-6
changelog:
  - xfsdump: restoring inventory prevents non-directory files being restored from tape
  - related: bz#2166554


author: Eric Sandeen <sandeen@redhat.com> 5.0.0-1
changelog:
  - New upstream version (#1712147)
  - mkfs.xfs: validate extent size hint parameters (#1683007)
  - mkfs.xfs: null-terminate symlinks created via protofile (#1640503)
  - xfs_repair: allow '/' in attribute names (#1667354)
  - xfs_info: allow device name as parameter (#1679840)
  - xfs_quota: fix project inheritance flag handling (#1664105)
  - xfs_metadump: handle symlinks correctly (#1693074)
  - xfs_db: fix finobt record decoding with sparse inodes (#1690245)


author: Eric Sandeen <sandeen@redhat.com> 5.0.0-2
changelog:
  - mkfs.xfs: validate log stripe unit alignment (#1632596)
  - xfs_growfs: allow mounted device node as argument (#1765217)


author: Bill O'Donnell <billodo@redhat.com> 5.0.0-6
changelog:
  - xfs_repair: improve AG btree ptr validation (libxfs_verify_agbno) (#1887288)
  - mkfs.xfs: fix ASSERT on too-small device with stripe geometry (#1887401)
  - xfs_repair: fix rebuilding btree block less than minrecs (#1759452)


author: Bill O'Donnell <billodo@redhat.com> 5.0.0-7
changelog:
  - xfs_quota: document how the default quota is stored (#1850188)
  - xfs_db: skip type change if type_f unchanged (#1867474)


author: Pavel Reichl <preichl@redhat.com> - 5.0.0-11
changelog:
  - Fix xfstest fails with error "missing xfsprogs fix patch"(#2161936,#2160746)
  - Fix ignore autofs mount table entries (#2182361)


author: Pavel Reichl <preichl@redhat.com> - 5.0.0-12
changelog:
  - Fix xfs_repair progress reporting is not working (#2183398)
  - Fix man page default for sparse mkfs option (#2118564)


author: Eric Sandeen <sandeen@redhat.com> 4.19.0-1
changelog:
  - New upstream release (#1652248)
  - Note reflink default in mkfs.xfs manpage (#1641698)
  - Fix xfs_db sign extension in agi freecount (#1640090)
  - Fix xfs_repair hang on large filesystem (#1630674)


author: Rob Crittenden <rcritten@redhat.com> - 1.51.0-7
changelog:
  - lib: Prevent more integer overflows (CVE-2022-22822 to CVE-2022-22827)
    (#2058567, #2058576, #2058582, #2058589, #2058595, #2058602)
  - Prevent integer overflow on m_groupSize in doProlog
    (CVE-2021-46143) (#2058560)


author: Ondrej Vasik <ovasik@redhat.com> 0.0.27-1
changelog:
  - New version 0.0.27
  - remove several bashisms in scripts
  - add new option --profile for preprocessing documents
    with profiling stylesheet
  - fix several potential crashes in xmlif (found by static analysis)


author: Adam Jackson <ajax@redhat.com> - 7.7-21
changelog:
  - oclock 1.0.4
  - xeyes 1.1.2
  - xfontsel 1.0.6
  - xload 1.1.3
  - xmessage 1.0.5
  - xpr 1.0.5
  - xwd 1.0.7
  - xwud 1.0.5


author: Michel Dänzer <mdaenzer@redhat.com> - 19.1.0-1
changelog:
  - ati 19.1.0 (#1728818)
  - Drop patch 0001-Don-t-set-up-black-scanout-buffer-if-LeaveVT-is-call.patch,
    merged upstream
  - Add patches 0001-Handle-NULL-fb_ptr-in-pixmap_get_fb.patch &
    0002-Don-t-crash-X-server-if-GPU-acceleration-is-not-avai.patch from
    upstream Git master, fixing crashes with ShadowFB


author: Hans de Goede <hdegoede@redhat.com> - 1.0.12-4
changelog:
  - Fix the crtc not being turned off, causing the dgpu to not suspend,
    after using a dgpu attached output


author: Christophe Fergeau <cfergeau@redhat.com> - 0.1.5-7
changelog:
  - Add upstream patches for Python 3 support
  - Validate RANDR output property atoms
  - Add patch fixing crash with multiple QXL devices
  - This syncs the RHEL branch with both current rawhide and RHEL 7.6


author: Michel Dänzer <mdaenzer@redhat.com> - 1.20.8-3
changelog:
  - Downgrade modesetting "glamor initialization failed" X_ERROR → X_INFO
    Resolves: #1724573
  - Xwayland / Present leak fixes for #1728684


author: Michel Dänzer <mdaenzer@redhat.com> - 1.20.8-5
changelog:
  - xwayland: Hold a pixmap reference in struct xwl_present_event
    Related: #1728684
  - glamor: Fix glamor_poly_fill_rect_gl xRectangle::width/height handling
    Resolves: #1740250


author: Michel Dänzer <mdaenzer@redhat.com> - 1.20.8-8
changelog:
  - CVE fixes for: CVE-2020-14345 (#1872391), CVE-2020-14346 (#1872395),
    CVE-2020-14361 (#1872402), CVE-2020-14362 (#1872409)


author: Olivier Fourdan <ofourdan@redhat.com> - 1.20.11-4
changelog:
  - CVE fix for: CVE-2021-4008 (#2030162), CVE-2021-4009 (#2030172),
    CVE-2021-4010 (#2030175), CVE-2021-4011 (#2030181)


author: Olivier Fourdan <ofourdan@redhat.com> - 1.20.11-9
changelog:
  - CVE fix for: CVE-2022-2319/ZDI-CAN-16062, CVE-2022-2320/ZDI-CAN-16070
    Resolves: rhbz#2108156, rhbz#2108161


author: Peter Hutterer <peter.hutterer@redhat.com> - 1.20.11-11
changelog:
  - CVE fix for: CVE-2022-4283 (#2151799), CVE-2022-46340 (#2151774),
    CVE-2022-46341 (#2151779), CVE-2022-46342 (#2151784),
    CVE-2022-46343 (#2151789), CVE-2022-46344 (#2151794)


author: Olivier Fourdan <ofourdan@redhat.com> - 21.0.99.902-1
changelog:
  - xwayland 21.0.99.902
  - Remove xdmcp, udev, udev_kms build options
  - Stop overriding the vendor name, same as xorg-x11-server


author: Olivier Fourdan <ofourdan@redhat.com> - 21.1.3-2
changelog:
  - CVE fix for: CVE-2021-4008 (#2038066), CVE-2021-4009 (#2038068),
    CVE-2021-4010 (#2038071), CVE-2021-4011 (#2038073)


author: Olivier Fourdan <ofourdan@redhat.com> - 21.1.3-6
changelog:
  - CVE fix for: CVE-2022-2319/ZDI-CAN-16062, CVE-2022-2320/ZDI-CAN-16070
    Resolves: rhbz#2110442, rhbz#2110437


author: Peter Hutterer <peter.hutterer@redhat.com> - 21.1.3-8
changelog:
  - CVE fix for: CVE-2022-4283 (#2151802), CVE-2022-46340 (#2151777),
    CVE-2022-46341 (#2151782), CVE-2022-46342 (#2151785),
    CVE-2022-46343 (#2151792), CVE-2022-46344 (#2151795)


author: Adam Jackson <ajax@redhat.com> - 7.7-25
changelog:
  - iceauth 1.0.8
  - xkill 1.0.5
  - xrdb 1.1.1
  - xrefresh 1.0.6
  - xset 1.2.4
  - xsetroot 1.1.2
  - HTTPS URLs


author: Adam Jackson <ajax@redhat.com> - 1.0.9-12
changelog:
  - Nerf the python-related BuildRequires. They're only needed for 'make check',
    and cmdtest is not yet a python3 package.


author: Hans de Goede <hdegoede@redhat.com> - 1.3.4-12
changelog:
  - Drop 0001-startx-Pass-nolisten-tcp-by-default.patch this is the
    server default now
  - Check for SSH_AUTH_SOCK not SSH_AGENT in xinitrc-common (rhbz#1352339)


author: Hans de Goede <hdegoede@redhat.com> - 1.3.4-13
changelog:
  - Check for all 3 of SSH_AGENT, SSH_AGENT_PID and SSH_AUTH_SOCK to fix
    a regression introduced by the previous fix (rhbz#1352339)


author: Adam Jackson <ajax@redhat.com> - 7.7-24
changelog:
  - Make -devel Require the base package, so the pc file will point to an
    xkbcomp that actually exists.


author: Zdenek Dohnal <zdohnal@redhat.com> - 0.999-28
changelog:
  - remove dependency on ImageMagick and netpbm-progs, because they were needed for
    tests during %build phase, which were removed in commit SHA 0595c15da29


author: Vladis Dronov <vdronov@redhat.com> - 0.8.2-1
changelog:
  - Update to version 0.8.2
  - Drop patch 1-fix-man-page-installation.patch
  - Use SPDX license identifiers


author: Pavel Raiskup <praiskup@redhat.com> - 5.2.3-1
changelog:
  - rebase to stable 5.2.3 per release notes:
    http://www.mail-archive.com/xz-devel@tukaani.org/msg00285.html


author: Pavel Raiskup <praiskup@redhat.com> - 5.2.4-1
changelog:
  - rebase to 5.2.4 (rhbz#1574039), per release notes:
    https://www.mail-archive.com/xz-devel@tukaani.org/msg00295.html


author: Pavel Raiskup <praiskup@redhat.com> - 5.2.4-2
changelog:
  - drop ppc64p7 hack, per fedora devel list discussion:
    https://lists.fedoraproject.org/archives/list/
    devel@lists.fedoraproject.org/thread/2OWD2QRDFBEC6HTPVQ7FMJENH32BWT54/
  - don't explicitly set _FILE_OFFSET_BITS, package uses AC_SYS_LARGEFILE


author: Tomas Popela <tpopela@redhat.com> - 2:3.28.1-3
changelog:
  - Add the Quit entry to the app menu
  - Handle Ctrl+Q shortcut for quitting the application
  - Resolves: rhbz#1638876


author: Matej Mužila <mmuzila@redhat.com> - 3:2.4-5
changelog:
  - Add "Wants" dependency on network-online.target
  - Remove "After" dependency on NetworkManager-wait-online.service


author: Jakub Martisko <jamartis@redhat.com> - 3.0-22
changelog:
  - Add missing linker flags
  - Port the configure patch from unzip that allows linker flags configuration
    from the spec file
  - Related: #1624188


author: Jakub Martisko <jamartis@redhat.com> - 3.0-23
changelog:
  - Set the ziperr function as noreturn
  - Fix email in the previous chnagelog entry
  - Related: #1602741


author: Ondrej Dubaj <odubaj@redhat.com> - 1.2.11-11
changelog:
  - IBM Z hardware-accelerated deflate for s390x architectures
  - IBM CRC32 optimalization for POWER 8+ architectures
  - fixed firefox crash due to zlib (#1741266)
  - added test for crc32


author: Ondrej Dubaj <odubaj@redhat.com> - 1.2.11-13
changelog:
  - Added -DDFLTCC parameter to configure to enable 
  - Z hardware-accelerated deflate for s390x architectures (#1659433)


author: Ondrej Dubaj <odubaj@redhat.com> - 1.2.11-16
changelog:
  - Permit a deflateParams() parameter change
  - Another fix for Z hardware-accelerated deflate for s390x architectures
  - according to previous change by upstream


author: Ondrej Dubaj <odubaj@redhat.com> - 1.2.11-17
changelog:
  - Fixed DFLTCC compression level switching issues (#1875492)
  - Enabled HW compression for compression levels 1 through 6 (#1847438)
  - Fixed inflateSyncPoint() bad return value on z15 (#1888930)


author: Lukas Javorsky <ljavorsk@redhat.com> - 1.2.11-19
changelog:
  - Apply IBM patch for compressBound() function
  - Source from https://github.com/madler/zlib/issues/410#issuecomment-947212824
  - Resolves: #2056900


author: Matej Mužila <mmuzila@redhat.com> - 1.2.11-20
changelog:
  - Fix heap-based buffer over-read or buffer overflow in inflate in inflate.c
  - Resolves: CVE-2022-37434


author: Lukas Javorsky <ljavorsk@redhat.com> - 1.2.11-23
changelog:
  - Rebased Power 8 optimization patches
  - Fix for Unnecessary IFUNC resolver for crc32_z
  - Fix for python3.11 broken libxml2 and lxml on s390x


author: Kamil Dudka <kdudka@redhat.com> - 5.4.2-7
changelog:
  - avoid crash when copying empty hash table (CVE-2018-7549)
  - avoid NULL dereference when using ${(PA)...} on an empty array (CVE-2018-7548)


author: Kamil Dudka <kdudka@redhat.com> - 5.5-1
changelog:
  - update to latest upstream release, which fixes the following vulnerabilities:
      CVE-2018-1100 - stack-based buffer overflow in utils.c:checkmailpath()
      CVE-2018-1083 - stack-based buffer overflow in compctl.c:gen_matches_files()
      CVE-2018-1071 - stack-based buffer overflow in exec.c:hashcmd()


author: Jakub Martisko <jamartis@redhat.com> - 0.13.68-3
changelog:
  - Fix CVEs 2018-7725, 2018-7726, 2018-7727, 2018-6484, 2018-6869 
  - Resolves: 1555082
  - Resolves: 1545818


author: Jakub Martisko <jamartis@redhat.com> - 0.13.68-6
changelog:
  - Fix multilib regression by adding a 32bit version of the multilib patch
  - Properly bump the release number in the previous changelog message
  - Resolves: #1638337


