Workload skew report Skew information will only be generated if: - there is more than one Workload Definition (WD/FWD) - there is more than one Storage Definition (SD/FSD) - there is more than one Host - there is more than one Slave (Though these rules may be ignored from time to time). Link to Run Definitions: rd1 For loops: None 09:55:07.008 Starting RD=rd1; I/O rate: 100; elapsed=5; For loops: None 09:55:12.162 09:55:12.162 Counts reported below are for non-warmup intervals. 09:55:12.164 09:55:12.164 i/o MB/sec bytes read resp read write resp resp queue 09:55:12.164 SD: rate 1024**2 i/o pct time resp resp max stddev depth 09:55:12.166 sd1 101.75 0.10 1024 50.86 0.008 0.007 0.009 0.057 0.004 0.0 09:55:12.168 Total 101.75 0.10 1024 50.86 0.008 0.007 0.009 0.057 0.004 0.0